Automatic Self Priming Booster Pump

For hot and cold water pressure boosting. For water taking from the well, for farm and garden irrigation, and small air conditioning system. The pump is ideal for small living water supply system, especially in the circumstances of insufficient water pressure, such as tap water, shower, etc. The pump should be installed in an enclosed environment or sheltered from inclement weather.
Chat Now

Product Details

APS-I Automatic Self Priming Booster Pump

主图APS_MG_5999

876

PERFORMANCE RANGE

Flow rate up to 70l/min

Head up to 65m

 

FEATURES

Double control by flow sensor and pressure sensor adjusts operation automatically.

3-second delay of pump start after plugging to avoid the possible danger caused by electric sparks.

Automatically stop in 60 seconds once dry running is detected.

Stable water supply-no frequent start/stop in the conditions of small water flow (40-50l/h).

10-second automatic operation every 72 hours for anti-block protection.

Anti-freezing function by automatic start/stop control.

LED display available on request, gives accurate operation status, start/stop pressure setting, and malfunction alarm.   

 

OPERATING CONDITIONS

Liquid temperature up to +80

Ambient temperature up to +40

Max. Working pressure 10bar

Continuous duty

 

ELECTRIC MOTOR

Two-pole induction motor, 50Hz

Standard voltage 1x220V-240V

With thermal protector incorporated into the winding

Insulation class F

Protection IP44

 

COMPONENTS

Microcomputer control system

Single phase pump

2L Pressure tank

Pressure switch

Flow sensor

1.5m power cable with plug               


Hot Tags: automatic self priming booster pump, China, manufacturers, suppliers, factory
FEATURES Double control by flow sensor and pressure sensor adjusts operation automatically. 3-second delay of pump start after plugging to avoid the possible danger caused by electric sparks. Automatically stop in 60 seconds once dry running is detected. Stable water supply-no frequent start/stop in the conditions of small water flow (40-50l/h). 10-second automatic operation every 72 hours for anti-block protection. Anti-freezing function by automatic start/stop control. LED display available on request, gives accurate operation status, start/stop pressure setting, and malfunction alarm. OPERATING CONDITIONS Liquid temperature up to +80℃ Ambient temperature up to +40℃ Max. Working pressure 10bar Continuous duty ELECTRIC MOTOR Two-pole induction motor, 50Hz Standard voltage 1x220V-240V With thermal protector incorporated into the winding Insulation class F Protection IP44 COMPONENTS Microcomputer control system Single phase pump 2L Pressure tank Pressure switch Flow sensor 1.5m power cable with plugFlow rate up to 70l/min Head up to 65m

Inquiry

You Might Also Like