Non Submersible Circulation Pump Manual

It is a 3- speed circulation pump that can be used in both open and closed systems. The pump is of the wet -rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pumps are designed for circulation of liquids in heating and air- conditioning systems. Examples of typical applications are: One- and two -pipe heating systems Boiler shunt pumps Pumps for heating surfaces Calorifiers Under floor heating systems Solar heating systems Heat pump systems Geothermal heating systems Heat recovery systems Two -pipe air -conditioning systems Pumps for refrigeration units. The pump must be installed with horizontal motor shaft
Chat Now

Product Details

FPS-F Three Phase Three Speed Hot Water Circulation Pump

 

INSTALLATIONS AND USE

It is a 3- speed circulation pump that can be used in both open and closed systems. The pump is of the wet -rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.


The pumps are designed for circulation of liquids in heating and air- conditioning systems. Examples of typical applications are:


One- and two -pipe heating systems
Boiler shunt pumps
Pumps for heating surfaces
Calorifiers
Under floor heating systems
Solar heating systems
Heat pump systems
Geothermal heating systems
Heat recovery systems
Two -pipe air -conditioning systems
Pumps for refrigeration units.


The pump must be installed with horizontal motor shaft


PERFORMANCE RANGE
Flow rate up to 41m3/h
Head up to 12m

OPERATING CONDITIONS
Liquid temperature up to +110ºC
Ambient temperature up to +40ºC
Sound pressure ≤45 Db(A)
Max. Working pressure 10bar
Continuous duty

 

ELECTRIC MOTOR
Two- pole induction motor, 50HZ

Standard voltage 3x380V-415V
Insulation class H
Protection IP42

SPEED SWITCH
The pump offers three speed for adjustment of pump performance to the system. Change to a lower speed enables reduction in energy consumption and less noise in the system



678

Hot Tags: non submersible circulation pump manual, China, manufacturers, suppliers, factory
OPERATING CONDITIONS Liquid temperature up to +110ºC Ambient temperature up to +40ºC Sound pressure ≤45 Db(A) Max. Working pressure 10bar Continuous duty ELECTRIC MOTOR Two- pole induction motor, 50HZ Standard voltage 3x380V-415V Insulation class H Protection IP42 SPEED SWITCH The pump offers three speed for adjustment of pump performance to the system. Change to a lower speed enables reduction in energy consumption and less noise in the systemFlow rate up to 41m3/h Head up to 12m

Inquiry

You Might Also Like