Plastic Clean Water Submersible Pump

INSTALLATIONS AND USE

SP

.For clean water containing solids up to 5mm

.For discharging domestic waste water

.For draining rooms or emptying tanks

.Extraction of water from ponds, streams and for rainwater collection

.For irrigation purpose

SPD

.For dirty water, containing solids up to 35mm

PERFORMANCE RANGE

.Flow rate up to 25000l/h

 .Head up to 16m

OPERATING CONDITIONS

.Liquid temperature up to+35℃

.Ambient temperature up to +40℃

 .Max. Immersion depth 5m

OPTIONS AVAILABLE ON REQUEST

.Special mechanical seal

.Other voltages or 60Hz frequency

 .Pumps without the float switch

.Longer or shorter cable

ELECTRIC MOTOR

.Two -pole induction motor, 50Hz(n=2850rpm)

 .Single phase 220V-240V

-With thermal protector incorporated into the winding

-With float switch for automatic start/ stop

 .Insulation class F

.Protection IPX8

COMPONENT MATERIALS

Pump body                  PP

Suction filter                PP

Impeller                    PA66 -GF30

Shaft                      45#steel with anti -corrosive treatment

Seal                        Mechanical seal/ Carbon -Ceramic -NBR

Motor front case           Stainless iron with anti- corrosive treatment Stainless steel AISI304 on request

Motor end case              Carbon steel