FPA-1 HOME BOOSTER CIRCULATOR
INSTALLATIONS AND USE
It is a circulating pump designed for pressure boosting of water in domestic properties. The pump provides additional pressure to showers, taps and similar outlet points for domestic water. The pump incorporates or connects a flow switch which starts and stops the pump when a tap is turned on or off.
The pump selector can be set to the positions OFF, AUTO and MANUAL. When the selector is in the position MANUAL, at least one tap must be open. Otherwise the pumped liquid may over heat.
SELECTOR IN POSITION
Position The pump
Ⅰ OFF is switched off
Ⅱ AUTO starts and stops automatically
Ⅲ MANUAL run continuously (also if the taps are turn off)
PERFORMANCE RANGE
Flow rate up to 60l/ min
Head up to 15m
OPERATING CONDITIONS
Liquid temperature up to +90℃
Ambient temperature up to +40℃
Max Working pressure 6bar
Continuous duty
ELECTRIC MOTOR
Two-pole induction motor, 50HZ
Standard voltage 1x220V-240V
Insulation class H
Protection IP42
ACCESSORIES
Brass Unions
Gaskets and filter
Screw driver
Teflon tape
1.5m power cable with plug
SELECTOR IN POSITION
Position The pump
Ⅰ OFF is switched off
Ⅱ AUTO starts and stops automatically
Ⅲ MANUAL run continuously (also if the taps are turn off)
PERFORMANCE RANGE
Flow rate up to 60l/ min
Head up to 15m
OPERATING CONDITIONS
Liquid temperature up to +90℃
Ambient temperature up to +40℃
Max Working pressure 6bar
Continuous duty
ELECTRIC MOTOR
Two-pole induction motor, 50HZ
Standard voltage 1x220V-240V
Insulation class H
Protection IP42
ACCESSORIES
Brass Unions
Gaskets and filter
Screw driver
Teflon tape
1.5m power cable with plug