4 pole Sewage Drainage Pump
INSTALLATIONS AND USE
.For pumping slurry, sewage, waste water(non-aggressive) with
solids and filamentous parts in industrial and residential installations and drainage applications
.For water supply and drainage in farming, construction sites, etc.
.Available with an agitator to assist smooth suction of the pumping fluid
Flow rate up to 1200m /h .
Head up to 52m
.Liquid temperature up to +35℃
.Ambient temperature up to +40℃ .
Max. Immersion depth
-10m for pumps from 0.75kW to 5.5Kw
-20m for pumps from 7.5kW to 22kW
OPTIONS AVAILABLE ON REQUEST
.Special mechanical seal
.Other voltages or 60Hz frequency .
Longer or shorter cable
.Two-pole induction motor, 50Hz(n=2850rpm) .
Four-pole induction motor, 50Hz(n=1450rpm) .
Single phase 220V-240V
-With thermal protector incorporated into the winding
-Available with float switch for automatic start/stop
.Three phase 380V-415V
-Equipped with built-in thermal protector.
Insulation class F
Upper cover Cast iron
Motor case Cast iron
Pump body Cast iron
Impeller Cast iron Ductile iron
Motor shaft Stainless steel AISI 304
Mechanical seal Carbon -Ceramic- NBR Si C-Si C