automatic Booster Pumps
INSTALLATIONS AND USE
.It is a circulating pump designed for pressure boosting of water in domestic properties. The pump provides additional pressure to showers, tapes and similar outlet points for domestic water. The pump incorporates or connects a flow switch which starts and stops the pump when a tape is turned on or off.
.The pump selector can be set to the positions OFF, AUTO and MANUAL. When the selector is in the position MANUAL, at least one tap must be open. Otherwise the pumped liquid may over heat.
Selector in position
Position The pump..
ⅠOFF is switched off
ⅡAUTO starts and stops automatically
ⅢMANUAL run continuously (also if the taps are turn off)
.Flow rate up to 120l/min
.Head up to 35m
.Liquid temperature up to +90℃
.Ambient temperature up to +40℃
.Max. Working pressure 6bar
.Two -pole induction motor, 50HZ or 60HZ
.Insulation class H
.Gaskets and filter
.1.5m power cable with plug