Automatic Water Heater Booster Pump
.It is a circulating pump designed for pressure boosting of water in domestic properties. The pump provides additional pressure to showers, tapes and similar outlet points for domestic water. The pump connects a flow switch which starts and stops the pump when a tape is turned on or off.
.The pump selector can be set to the positions OFF, AUTO and MANUAL. When the selector is in the position MANUAL, at least one tap must be open. Otherwise the pumped liquid may over heat.
SELECTOR IN POSITION
Position The pump..
Ⅰ OFF is switched off
Ⅱ AUTO starts and stops automatically
Ⅲ MANUAL run continuously (also if the taps are turn off)
.Flow rate up to 25l/min
.Head up to 15m
.Liquid temperature up to +40℃
(+100℃ for 15WGR-15)
.Ambient temperature up to +40℃
.Max. Working pressure 6bar
.Two -pole induction motor, 50HZ or 60HZ
.Insulation class F
.Gaskets and filter
.Brass flow switch
.1.5m power cable with plug