House Automatic Booster Pumps

INSTALLATIONS AND USE

.For hot and cold water pressure boosting

.For water taking from the well, for farm and garden irrigation, and small air conditioning system

.The pump is ideal for small living water supply system, especially in the circumstances of insufficient water pressure, such as tape water, shower, etc.

.The pump should be installed in an enclosed environment or sheltered from inclement weather.

PERFORMANCE RANGE

.Flow rate up to 70l/min

.Head up to 65m

FEATURES

.Double control by flow sensor and pressure sensor adjusts operation automatically.

.3-second delay of pump start after plugging to avoid the possible danger caused by electric sparks.

.Automatically stop in 60 seconds once dry running is detected.

.Stable water supply-no frequent start/stop in the conditions of small water flow.

.10-second automatic operation every 72 hours for
anti-block protection.

.Anti-freezing function by automatic start/stop control

.LED display gives accurate operation status, start/stop pressure setting, and malfunction alarm (For AP S- IIpumpsonly).

OPERATING CONDITIONS

.Liquid temperature up to+90℃

.Ambient temperature up to+40℃

.Max.Working pressure 10bar

.Continuous duty

ELECTRIC MOTOR

.Two-pole induction motor, 50Hz or 60Hz

.Standard voltage

-1x220V-240V

-1x110V-127V

.With thermal protector incorporated into the winding

.Insulation class F

.Protection IP44

COMPONENTS

.Microcomputer control system

.Single phase pump

.2LPressure tank

.Pressure transmitter

.Flow sensor

.1.5m power cable with plug