High Flow Agriculture Centrifugal Pumps

INSTALLATIONS AND USE

.For pumping clean liquids without abrasive particles, which are chemically non aggressive to the pump materials

.For water supply

.For flood  and spray irrigation,  drawing water from lakes, rivers and wells

.For heating, air-conditioning, cooling and circulation plants

.For civil and industrial applications where the characteristics of high flow rates and mid to low head are required

.The ump should be installed in an enclosed environment or sheltered from inclement weather

PERFORMANCE RANGE

.Flow rate up to 450l/min

.Head up to 100m

OPERATING CONDITIONS

.Liquid temperature up  to +35℃

.Ambient temperature up to +40℃

.Max. Working pressure 10bar

.Continuous duty

OPTIONS AVAILABLE ON REQUEST

.Special mechanical seal

.Other voltages or 60Hz frequency

.Higher or lower liquid temperatures

ELECTRIC MOTOR

.Two -pole induction motor, 50Hz(n=2850rpm)
.Single phase 220V-240V, maximum 2.2kW

.Three phase 380V-415V

.With thermal protector incorporated  into the winding

.Insulation class F

.Protection IP44

COMPONENT MATERIALS

Pump body            Cast iron with an anti- corrosive coating

Impeller                  Brass

Support                  Cast iron with an anti -corrosive coating

Motor case             Aluminum

Shaft                      Stainless steel AISI 304

Mechanical seal     Carbon-SiC-SS304