Open Impeller Centrifugal Pumps

INSTALLATIONS AND USE

.For clean and slight dirty water, also with solids up to 10mm grain size for clean water type and 25mm for dirty water type

.For draining a basin or a sump

.For irrigation

.For civil and industrial applications

.The pump should be installed in an enclosed environment or sheltered from inclement weather

PERFORMANCE RANGE

.Flow rate up to 466l/min

.Head up to 45m

OPERATING CONDITIONS

.Liquid temperature up to +80℃

.Ambient temperature up to +40℃

 .Max. Working pressure 10bar

.Continuous duty

OPTIONS AVAILABLE ON REQUEST

.Special mechanical seal

.Other voltages or 60Hz frequency

.Higher or lower liquid temperatures

ELECTRIC MOTOR

.Two -pole induction motor, 50Hz(n=2850rpm)
.Single phase 220V- 240V, maximum 2.2kW

.Three phase 380V-415V

.With thermal protector incorporated into  the winding

.Insulation class F

.Protection IP44

COMPONENT MATERIALS

Pump body       Anti -corrosive coating cast iron

Impeller           Stainless steel AISI 304 for PHSm  Cast iron for PHSm-W

Support           Cast iron

Motor case        Aluminum

Shaft            Stainless steel AISI 304

Mechanical seal       Carbon- SiC-SS304