Product | Open Impeller Centrifugal Water Pump | ||
Brand | WASSERMANN | Model | BKm |
Usage | Clean water | Packing | Carton |
INSTALLATIONS AND USE
.For pumping clean liquids without abrasive particles, which are chemically non aggressive to the pump materials
.The open impeller design allows liquids containing impurities to be pumped without the risk of impeller clogging
.All of the components in touch with the pumped liquid are constructed from stainless steel AISI304, the pump are particularly suitable for use in plants for washing fruit, vegetables, fish and shellfish, in industrial washing plants and for circulation of cooling liquids.
.The pump should be installed in an enclosed environment or sheltered from inclement weather
PERFORMANCE RANGE
.Flow rate up to 730l/min
.Head up to 22m
OPERATING CONDITIONS
.Liquid temperature up to +80℃
.Ambient temperature up to +40℃
.Max. Working pressure 6bar
.Passage of suspended solids up to φ20mm
.Continuous duty
OPTIONS AVAILABLE ON REQUEST
.Special mechanical seal
.Other voltages or 60Hz frequency
.Higher or lower liquid temperatures
ELECTRIC MOTOR
.Two- pole induction motor, 50Hz(n=2850rpm)
.Single phase 220V -240V, maximum 2.2kW
.Three phase 380V-415V
.With thermal overload protector incorporated into the winding
.Insulation class F
.Protection IP44
COMPONENT MATERIALS
Pump body Stainless steel AISI 304
Mpeller Stainless steel AISI 304
Support Stainless steel AISI 304
Motor Case Aluminum
Shaft Stainless steel AISI 304
Mechanical seal Carbon -Ceramic -Viton for0.37kW Carbon -Sic -Viton for Single phase pumps Sic -Sic -Viton for Three phase pumps