Submersible Sewage Sewage Filthy Water Pump With Grinder Cutter
INSTALLATIONS AND USE
With free -flow (vortex) impeller
WITH A GRINDER SYSTEM
For grinding up solid bodies and fibers in waste and refluent water from domestic and civil applications and conveys it under pressure into the sewers through small diameter pipes
PERFORMANCE RANGE
Flow rate up to 270l/min
Head up to 10m
OPERATION CONDITIONS
Liquid temperature up to +35℃
Ambient temperature up to +40℃
Max.Immersiondepth5m
Continuous duty
ELECTRIC MOTOR
Two-pole induction motor, 50Hz (n=2850rpm)
Standard voltage 1x220V-240V, 3x380V-415V
Available with float switch for automatic start/stop for single phase pumps
Insulation class F
Protection IP68
OPTIONS AVAILABLE ON REQUEST
Special mechanical seal
Other voltages or 60Hz frequency
Longer or shorter cable
COMPONENT MATERIALS
Upper cover | Cast iron |
Motor case | Stainless steel AISI 304 |
Pump body | Cast iron |
Impeller | Cast iron |
Shaft | Stainless steel AISI 304 |
Mechanical seal | Carbon -Ceramic -NBR |
